Wood is the kind of material many people all around the world use; from building their homes, their furniture and many other uses. It is a nice material that it is already available given its natural origins. There are many types of it with multiple uses, advantages and appearances.
And speaking about that last item, looks, there are some amazing looking objects around that use wood as their main design element. From a single table to parts of a car interior; wood can be used to enhance the looks of many objects all around us.
At home, you can get amazing looking interiors and exteriors by using log siding. This is a fancy word for using wood as a decorative element at corners and walls of a home. Let’s find out how to install log siding at your home, and what you need to know before and after doing it.
What do you need to install log siding?
Before to start answering how to install log siding, you need to learn what do you need to install log siding. As many things in the construction work; you can’t just jump into the installation directly without before checking out the materials and tools you would need for the job.
For starters, the first things you need to look for is the tools used for measurements. You would need a measurement tape as the main tool for this purpose. You could also use those fancy measurement laser tools that can give you an accurate reading; however, if money is an issue you would go okay with the tape.
You would need also a level, preferably a 6´ one and chalk. The chalk would be the way you trace the lines where you can see the places to put the logs. The level would indicate you if the position of the logs is on point.
For other tools, a power drill and a mallet would be necessary. And since we are talking about hammering things, a bag of nails is also an item to consider. Finally, caulk is also required to finish the job; and also, to avoid moisture to get in between and at the corners of the logs.
What are the instructions for installing log siding?
When it comes to how to install log siding, there are certain steps you would need to take in order to have a nice log siding installed at your home. So, what are the instructions for installing log siding? Let’s find out!
First, you need to take your measurements. This is crucial for achieving the best job possible. You need to do all the sizes by using the chalk and outlining the log’s position in the wall and taking the dimensions with the tape.
Take the first log and put it at the bottom of the wall, without attaching it yet. The idea behind this is to level this piece first to allow the following ones to align the best way possible, and to match the correct height to avoid mistakes later on. When you are completely sure it fits the way it is supposed to, nail it to the wall with the nails or with screws. Galvanized ones are recommended.
Consider staggering the joints of those logs, especially at the corners. You need to do it when those corners are saddle notch corners, if you want them to look good. A good estimate for stagger would be around one foot, but that depends on the log length. Always keep them leveled, never forget this.
Using the tongue and groove method (inserting the logs into the corner and slide them down), continue adding logs to your wall. If you encounter issues fitting the logs, you can use the mallet to facilitate things up. After that, nail them in the recommended areas, dictated by the manufacturers and continue adding the pieces from the bottom all the way to the top.
What to do after installing log siding?
Nice! You have installed the log siding at your home, but the work is not done yet. While you may think that you learned how to install log siding, that does not prevent nature to making a mess of your hard work. Now, what to do after installing log siding?
After having all the log siding set to the wall, you would need to caulk the exterior corners. Using the properties of caulk to avoid moisture, you can prevent humidity from damaging the job you have done.
Some manufacturers can also offer you pre applied finishes or stains to your choice of log siding. It would look even cooler and could protect the finish of the job from the elements, including bugs, pests, humidity, fungus, and even ultra violet light from the sun.
That option of having log siding that is already treated, painted and finished could help you save a bit on more expenses, like contractors, machinery and others. If you want to do it yourself though, you can also do it, but you would need to consider all the necessary items to finish the job. From paints, stains, protective coatings, chemicals to treat pests, etc. There are many things you would need to include if you want a long-lasting log siding.
As said at the beginning of this post, wood is one of the most used materials of the construction world. From making the basis of many houses around the world, to giving them those impressive and lovely looks, wood can do a whole lot of things for you in your house.
Using log siding for the exterior walls of a home looks very nice and it should not be as difficult to install as you may think. However, if you do not know how to install log siding yourself, there are many businesses and manufacturers of these elements that can give you a helping hand on all this experience.
However, if you want to do it yourself, always keep in mind: Take all the necessary measurements, use the first log to position all the following ones, only nail the parts when you are absolutely sure, and after installation be sure to treat the wood with all the essential and required materials.