How to Keep Wood Stove Glass Clean

How to Keep Wood Stove Glass Clean Using a Newspaper

Do you experience blackening of the glass on your fireplace stove glass? Have you learned to stay on top by understanding how to clean a wood stove? First,  why does the glass on your wood stove glass turn black? It can be a bother to have to clean your fireplace glass to enjoy the fire fully. A buildup of soot and other small particles on the glass causes the blackening of your fireplace glass. 

It may be normal to see some cloudiness in your fireplace after a long period of use. Don’t start panicking when you see this. A few things are increasing the buildup of soot leading to your fireplace glass turning black. When the ratio between fuel and air in your fireplace is irregular, it will affect how well the fire burns. This increases the blackening of glass in the fireplaces. Below are different ways of how to keep wood stove glass clean:

Clean Your Wood Stove at Home – Wood Stove Glass Cleaner Homemade

Use Your Deadwood

It’s necessary to make sure your wood stove burns firewood that is parched to burn effectively. Around 20 percent or lower is the optimal moisture content for firewood. Usually, a seasoned firewood is parched enough to use in your wood stove. But you may still use a measured moisture before using it to identify the exact moisture found in your wood.

Wet firewood is hard to ignite and burn. When you use it in a fire, excess smoke can be produced. This leads to more lampblack being accumulated on your stove glass. Using hardwood logs in your fires is also safer. Softwood logs usually have higher juice substance. Hence, increase the fireplace glass blackening. 

Maintain the Air Wash

By providing a flow of air down the inside of the glass on the door, air washing works. And this helps prevent soot particles from accumulating on the glass causing the blackening effect. If your fireplace stove has an air wash system, one or more of the air vents can act as part of airflow in the stove. The secondary air vent on a wood-burning stove usually supplies air down the glass.

The secondary air vent may be found on the front of the stove near the top. The only controllable air vent is usually situated under the stove on your wood-burning stove. It supplies both primary air to the fire and secondary air to the air wash.

Don’t Let the Fire Smolder

Due to the remiss burning of the wood, a fire inside a wood-burning stove can smoke. inadequate amounts of air reaching the fire may be one of the main causes of inefficient burning of wood. Therefore, it’s necessary to ascertain that the air vents on a wood stove aren’t too close. This may prevent the fire from having enough air.

A wood stove provides an atmosphere in which the gas and the combustion may be managed to burn wood more effectively than in an accessible fireplace. It’s common for major air pipes on the wood stove glass to be shut down enough. With this, the fire burns the wood, without allowing the fire to burn or go out. 

The fire will begin and generate smoke if the air pipes are closed for long. This leads to an increase in the lampblack of the glass on the door of your wood stove. Leave the air pipes on the wood stove open for the fire to keep generating heat. This helps in the self-cleaning wood burning stove, without allowing the fire to burn and generate smoke.

Build Fire at the Back

When the fire is close to the fireplace glass, it leads to a go up speed of blackening. It may as well make cleaning the stains more difficult. Try to form and preserve the fire in your burning stove at the back of the fireplace. You can have hotter fires. This may help you on how to keep wood stove glass clean. It helps burn off any exceeding lampblack and smoke.

Wipe Down the Glass Between Fires

To stay on top of any blackening of the glass, use wet newspapers. Or you can use wet newspaper dipped in ash, on the fireplace glass between fires. For many years, this method has worked. Staying on top to avoid soot from building up on the glass ensures no traditional cleaning equipment may need to be used as much as possible.

How to Clear the Glass of a Wood Fireplace

The best way to clean fire glass is by using newspaper and a little bit of ash. This trick may cut through the build-up on the inside of the wood fireplace. You don’t need to purchase specialty cleaning supplies. Use the 5-step process below to ensure your self-cleaning wood-burning stove process goes well:

1. Crumple newspaper.

2. Wet a portion of the newspaper lightly.

3. Dip a dampened newspaper in the bed of ashes in your fireplace.

4. Rub the ash slowly on the glass in a circular motion.

5. Wipe away any film with a different piece of newspaper or soft microfiber cloth.

The above method is intended to act as a simple guide to cleaning fire glass. As always, for guidance on how best to clean your machine, check your owner’s manual. Thus you can compare with a wood stove glass cleaner homemade. Before completing any maintenance activities, ensure that the device is cold.

Conclusion

Do you want to see the beautiful, glowing flames from your fireplace?  Of course, this is part of why you got your stove in the first place. It’s also an attractive focal point in any living area. So, the simplest way on how to keep wood stove glass clean is to clean it regularly. 

When burning regular fires, cleaning fire glass each week is necessary. Never clean your fireplace or woodstove when it’s hit. This also applies to the glass. It’s difficult to like the satisfaction of your woodstove glass. If it’s not in decent shape for working. This includes a cleaned glass. By following good fire-burning practices, you can as well keep the glass transparent. This will decrease the time you spend on your wood-burning stove. You can now enjoy your fire in all its glory! This is because you now know how to clean wood stove glass.

Scroll to Top